When you double the thickness of epoxy you will basically cut the transparency in half for that portion. The dimensions will be 47 long by 21 wide.
Others may prefer a very slim thick table top on a geometric table base for a floating look.
Woodworking table thickness. The wood movement you might see both in width and thickness the same rate of movement for both in rift sawn lumber is 1 64. That said since you have thicker wood that suits you you might consider making it 3 4 at the edges only. A bevel on the underside of a table can lighten the feel of the top without removing lots of material.
But there is no reason you couldn t do the same trick with the wood on the outside. And they ve been stable. Unlike traditional resin table with resin on the inside and wood on the outside.
For many times longer than i ve been alive. We have a similar machine. Normal roller height 002 003 above table.
I opted to use wood cast with epoxy on the outside for this project. Looking at the end of the table base its total change in width from winter to summer is 1 32. I agree with steve the table rollers are raising the front end of the board into the cutterhead.
3 things to try. Question we are planning to produce maple table tops that will rest unattached on metal bases. Table top thickness varies greatly with contemporary styles some will prefer an extra thick 1 3 4 thick table top on thin legs such as hairpin legs creating an intriguing contrast.
Always angle the part through the machine. Lower the table rollers to level or below the table we have to do this with thin wood. Solid wood table top thickness and warping ideas about how to make a solid wood table top that will stay stable.
We are debating what thickness the table tops should be in order to resist warp. That thickness has been used for tables casework etc.