It is most needed at the tablesaw jointer router table and bandsaw. I make my push sticks from 3 4 in.
A push stick is a shaped length of wood or other material that helps control the movement of a workpiece.
Fine woodworking push sticks. I will cut through a push stick a few times and once the heel starts to get compromised i throw out the push stick and get a new one. This push stick rides in the channel on top of a biesemeyer style rip fence. Baltic birch plywood which does not have voids so when i cut through the push stick i don t run the risk of the heel breaking off.
The influence of fine woodworking magazine on my journey as a craftsman can t be overstated. In our shops we keep extra push sticks handy and there is always one sitting on top of a machine table or hung on a hook nearby. I find that this push stick design gives me better control helping me push the piece forward and against the fence at the same time with enough width so that its handle and my hand passes easily to the right of the blade guides.
It also helps maintain an even pressure and feed rate reducing the risk of kickback and producing a smoother cut. Read the article to learn all about push sticks. But there s a common thread among the woodworkers who unfailingly use them more than likely they ve got all ten fingers.
Push sticks push blocks hold ins and featherboards are simple little things usually made up from scraps around the shop. Oberwager devised this clever method for ripping thin strips on the tablesaw. Some folks use standard push sticks for keeping fingers safe on the bandsaw and others don t bother.
Using a push stick keeps hands away from blades and cutters. Rip thin stock with a fence riding push stick. Using a push stick keeps hands away from blades and cutters.